Blooming 9-Patch




I finished Jeri's Blooming 9-Patch quilt this afternoon. I used an overall pantograph on the quilt with Iced Blue Signature cotton thread and Hobbs 80/20 batting. The binding was applied to the front of the quilt after quilting while it was still on the quilting machine. This is an easy way to handle binding. You don't have to mess with shoving the large quilt through your domestic sewing machine to apply the binding. It's much quicker and easier. I used my straight edge ruler to maintain a 1/4 inch seam allowance. The binding will be turned to the back and hand stitched in place.
The photo of the backing shows the quilting better than the front of the quilt. This is a medium density panto that gives good coverage and yet it isn't too busy looking.
I think it turned out nicely.
Susan

Comments

Susan said…
The quilt is gorgeous. What a fun all-over design!
August 13, 2008 at 5:02 PM
Anonymous said…
Beautiful quilt and machine quilting.
August 19, 2008 at 1:19 PM
Anonymous said…
Beautiful blue quilt and machine quilting!
August 19, 2008 at 1:21 PM
Post a Comment

Popular posts from this blog

Log Cabin

Image
I don't know the title of this quilt, but it is a Log Cabin Variation that I just completed for a customer. I love the soft blues and browns in this quilt.  It just begged for feathers. See what I mean? I did add a few leaves in the small border, though.
Read more

Zipper Leader Tutorial - Part 1

Image
I removed my old zippers yesterday and completed attaching my new zippers. Along the way I made 2 additional sets of zipper leaders so I have the ability to have 3 quilts ready to zip on if I need to. As promised, I took photos of the steps and will post them in stages. These directions are my own and you may be able to find other instructions out the internet. This is something I came up with on trial and error. The first set of zipper leaders I made were with garment zipper that you buy by the yard at a fabric store. They didn't work out the way I wanted. They kept separating on their own. So now I have 8 yards of zipper to use in other projects. First off you'll need some materials and supplies. 1. Canvas Duck - I purchased 4 yards of 60" wide canvas so I wouldn't have to seam the leaders. This is enough to make 5 sets of 2 leaders. Buy the length to match the length of your zippers. 2. Separating Zippers in the size of your choice - I purchased 144" long zippe
Read more

Glue Basting

If you want to try glue basting your bindings, check out Sharon Schamber's website for a video on the technique. This is whom I learned it from. Click on the "Free Area" link on the left, then "Free Area" on the next page. Scroll down to the December 2007 video "Binding the Angel". Sharon gives details of her glue basted binding technique. I do my glue basting a bit different, but the results are the same. I glue baste the binding all the way around the quilt before stitching it down. When I get to the end of the binding, I glue baste the miter, stitch that miter, then glue baste that area down. Then I go ahead and stitch the entire binding down. The 2 best tips I feel are to use "school glue" like Elmers or Rose Art. I've used both and they both work well. Don't use "All Purpose Glue". The 2nd tip is to heat set your glue with a hot iron. It dries the glue quickly. The glue washes out easily so you won't have any residu
Read more